您可以以CSV(逗号分隔值)格式导出设计。输出设计:

  1. 选择一个设计。

  2. 单击出口箭头，然后单击出口的设计。将出现一个浏览对话框。(也可以点击文件>出口>出口的设计。)

  3. 为CSV文件选择路径并指定文件名。

  4. 点击保存。

  5. CSV导出的文件包括设计中的每个IOmux一行和七列，其中包含以下数据:

    组件名称 资源 板类型 IOmux名字 垫 处理器垫 函数 电值

    组件类型及其自定义名称

    分配的组件资源

    衬垫的类型，无论是混合的还是固定的

    组件垫的名称(每个IOmux或固定垫一行)

    分配给IOmux的物理pad

    模块垫使用的微处理器垫的名称(仅当应用时)

    模块垫使用的微处理器功能的名称(仅当应用时)

    IOmux配置的电学值
生成的CVS文件使用该字符，作为值之间的分隔符，和\ r \ n作为记录分隔符。

导出CSV文件的示例:

9月=组件名称，资源，Pad类型，IOMux名称，Pad，处理器Pad，功能，电气值“控制台-串行控制台”，UART_5,Muxed,RX引脚端子，CPAD_25,MX6UL_PAD_UART5_RX_DATA,UART5_DCE_RX,0x1b0b1“控制台-串行控制台”，UART_5,Muxed,TX引脚端子，CPAD_24,MX6UL_PAD_UART5_TX_DATA,UART5_DCE_TX,0x1b0b1“UART - UART4”，UART_4,Muxed,RX引脚，CPAD_69,MX6UL_PAD_LCD_ENABLE,UART4_DCE_RX,0x1b0b1“UART - UART4”，UART_4,Muxed,TX引脚，CPAD_56,MX6UL_PAD_LCD_CLK,UART4_DCE_TX,0x1b0b1“I2C -”I2C”,I2C_2 mux、信号时钟,CPAD_31, MX6UL_PAD_GPIO1_IO00, I2C2_SCL, 0 x4001b8b0”I2C——I2C”,I2C_2, mux,信号数据,CPAD_32, MX6UL_PAD_GPIO1_IO01, I2C2_SDA, 0 x4001b8b0”USDHC - SD卡”,USDHC_2, mux, USDHC clk, CPAD_21, MX6UL_PAD_CSI_VSYNC, USDHC2_CLK, 0 x10039”USDHC - SD卡”,USDHC_2, mux, USDHC cmd, CPAD_17, MX6UL_PAD_CSI_HSYNC, USDHC2_CMD, 0 x17059”USDHC - SD卡”,USDHC_2, mux, USDHC data0, CPAD_20, MX6UL_PAD_CSI_DATA00, USDHC2_DATA0, 0 x17059”USDHC - SD卡”,USDHC_2, mux, USDHCdata1、CPAD_16 MX6UL_PAD_CSI_DATA01 USDHC2_DATA1 0 x17059“USDHC - SD卡”,USDHC_2, mux, USDHC data2 CPAD_22, MX6UL_PAD_CSI_DATA02, USDHC2_DATA2, 0 x17059“USDHC - SD卡”,USDHC_2, mux, USDHC data3, CPAD_23, MX6UL_PAD_CSI_DATA03, USDHC2_DATA3, 0 x17059“以太网总线MDIO ethernet_mdio_id_0”,ETHERNET_MDIO, mux, MDC, CPAD_37, MX6UL_PAD_GPIO1_IO07, ENET1_MDC, 0 x1b0b0“以太网总线MDIO ethernet_mdio_id_0”,ETHERNET_MDIO, mux, MDIO, CPAD_38, MX6UL_PAD_GPIO1_IO06 ENET1_MDIO 0 x1b0b0“以太网-以太网”,ETHERNET_1 mux、RDATA0 CPAD_48, MX6UL_PAD_ENET1_RX_DATA0, ENET1_RDATA00, 0 x1b0b0”以太网-以太网”,ETHERNET_1, mux, RDATA1, CPAD_54, MX6UL_PAD_ENET1_RX_DATA1, ENET1_RDATA01, 0 x1b0b0”以太网-以太网”,ETHERNET_1, mux, RXEN, CPAD_49, MX6UL_PAD_ENET1_RX_EN, ENET1_RX_EN, 0 x1b0b0”以太网-以太网”,ETHERNET_1, mux, rx, CPAD_50, MX6UL_PAD_ENET1_RX_ER, ENET1_RX_ER, 0 x1b0b0”以太网-以太网”,ETHERNET_1, mux, TDATA0, CPAD_55, MX6UL_PAD_ENET1_TX_DATA0, ENET1_TDATA00, 0 x1b0b0”以太网-以太网”,ETHERNET_1 mux、TDATA1 CPAD_51, MX6UL_PAD_ENET1_TX_DATA1, ENET1_TDATA01, 0 x1b0b0”以太网-以太网”,ETHERNET_1, mux, TXCLK, CPAD_53, MX6UL_PAD_ENET1_TX_CLK, ENET1_REF_CLK1, 0 x4001b031”以太网-以太网”,ETHERNET_1, mux, TXEN, CPAD_52, MX6UL_PAD_ENET1_TX_EN, ENET1_TX_EN, 0 x1b0b0”GPIO——ENET1_RST”,GPIO3_IO02, mux, GPIO, CPAD_57, MX6UL_PAD_LCD_HSYNC, GPIO3_IO02, 0 x10b0”GPIO - ENET1_INT #”,GPIO3_IO09, mux, GPIO, CPAD_58, MX6UL_PAD_LCD_DATA04, GPIO3_IO09, 0 x10b0”SPI - SPI”,SPI_3, mux,莫西人销、CPAD_46 MX6UL_PAD_UART2_CTS_B ECSPI3_MOSI 0 x10b0 SPI - SPI, SPI_3, mux,味噌销,CPAD_47, MX6UL_PAD_UART2_RTS_B, ECSPI3_MISO, 0 x10b0 SPI - SPI, SPI_3, mux, SCLK销,CPAD_44, MX6UL_PAD_UART2_RX_DATA, ECSPI3_SCLK, 0 x10b0 GPIO - SPI党卫军,GPIO1_IO20, mux, GPIO, CPAD_43, MX6UL_PAD_UART2_TX_DATA, GPIO1_IO20, 0 x10b0 SJC——JTAG, SJC_1, mux, JTAG mod, CPAD_33, MX6UL_PAD_JTAG_MOD, SJC_MOD, 0 xb808 SJC——JTAG, SJC_1, mux, JTAG tck, CPAD_40, MX6UL_PAD_JTAG_TCK, SJC_TCK, 0 xb808 SJC——JTAG, SJC_1, mux, JTAGtdi、CPAD_41 MX6UL_PAD_JTAG_TDI SJC_TDI 0 xb808 SJC——JTAG, SJC_1, mux, JTAG tdo, CPAD_39, MX6UL_PAD_JTAG_TDO, SJC_TDO, 0 xb809 SJC——JTAG, SJC_1, mux, JTAG tms, CPAD_34, MX6UL_PAD_JTAG_TMS, SJC_TMS, 0 x31 SJC——JTAG, SJC_1, mux, JTAG trstb, CPAD_42, MX6UL_PAD_JTAG_TRST_B, SJC_TRSTB, 0 xb808“USB - USB 1”,USB_1,固定,USB OTG N, CPAD_27, -, -, -“USB - USB 1”,USB_1,固定,USB OTG P, CPAD_26, -, -, -“USB - USB 2”,USB_2,固定,USB OTG N, CPAD_36, -, -, -“USB - USB 2”,USB_2,固定,USB OTG P, CPAD_35, -, -, -“PWM脉宽调制1”,PWM_1 mux、PWM CPAD_60, MX6UL_PAD_LCD_DATA00, PWM1_OUT, 0 x110b0”MCA ADC - MCA_ADC0”,ADC_MCA_IO0, mux, ADC MCA, CPAD_76, -, - 0 x0”GPIO - ADC / GPIO1_4”,GPIO1_IO04, mux, GPIO, CPAD_30, MX6UL_PAD_GPIO1_IO04, GPIO1_IO04, 0 x10b0”MCA GPIO - MCA IO04”,GPIO_MCA_IO4, mux, GPIO MCA, CPAD_75, -, - 0 x0”——CAN1”,CAN_1, mux, RX销,CPAD_11, MX6UL_PAD_LCD_DATA09, FLEXCAN1_RX, 0 x1b020”——CAN1”,CAN_1, mux, TX销,CPAD_10, MX6UL_PAD_LCD_DATA08, FLEXCAN1_TX, 0 x1b020”MCA GPIO - MCA IO07”,GPIO_MCA_IO7, mux, GPIOMCA,CPAD_71，-，-，0x0 "GPIO - GPIO3_4"，GPIO,CPAD_59,MX6UL_PAD_LCD_RESET,GPIO3_IO04,0x10b0 "GPIO - USER_BUTTON"，GPIO3_IO03,Muxed,GPIO,CPAD_67,MX6UL_PAD_LCD_VSYNC,GPIO3_IO03,0x10b0 "GPIO - USER_LED"，GPIO3_IO11,Muxed,GPIO,CPAD_62,MX6UL_PAD_LCD_DATA06,GPIO3_IO11,0x10b0 "GPIO - GPIO3_12"，GPIO3_IO12,Muxed,GPIO,CPAD_63,MX6UL_PAD_LCD_DATA07,GPIO3_IO12,0x10b0 "GPIO - GPIO3_10"，GPIO,CPAD_64,MX6UL_PAD_LCD_DATA05,GPIO3_IO10,0x10b0 "GPIO - GPIO3_10"，GPIO,CPAD_64,MX6UL_PAD_LCD_DATA05,GPIO3_IO10,0x10b0 "GPIO - GPIO3_10" GPIO3_7/PWM3",GPIO3_IO07,Muxed,GPIO,CPAD_66,MX6UL_PAD_LCD_DATA02,GPIO3_IO07,0x10b0